Corrosion Resistant Plates

Product Details:

S-TEN is a sulfuric acid and hydrochloric acid dew-point corrosion-resistant steel developed by Nippon Steel using proprietary technology.

• S-TEN exhibits the best resistance to sulfuric acid and hydrochloric acid dew-point corrosion found in the flue-gas treatment equipment used with coal-fired boilers, waste incineration plants, etc. (This steel has the finest application record in the field of thermal power generation and waste incineration plants, according to surveys conducted by Nippon Steel)
• S-TEN was awarded the Ichimura Industrial Award Achivement Award in 2007

S-TEN has strength, workability and weldability that are comparable to ordinary steel.S-TEN is more economical than stainless steel.S-TEN offers a rich product line ranging from hot-rolled sheets (plates), cold-rolled sheets and pipe and tubes to welding materials.

• Hot-rolled sheets (plates) conform to JIS G 3106 SM400A (S-TEN 1) and SM490A (S-TEN 2).

Recently, environmental issues are becoming pressing concerns. In parallel with this, construction of tall smokestacks, air preheaters, electrostatic precipitators and flue-gas desulfurizers and other treatment equipment has shown great strides.
Meanwhile, the mainstay industrial fuel has shifted from conventional coal to heavy oil, which poses a large problem of corrosion at the low-temperature section of flue-gas treatment equipment (in particular, air preheaters, flues and smokestacks) due to sulfur oxides.
The low-temperature section corrosion is the corrosion caused by high-temperature, highly-concentrated sulfuric acid, called sulfuric acid dew-point corrosion. This kind of corrosion differs from general atmospheric corrosion and causes heavy corrosion of not only ordinary steel but even stainless steel.
Further, because of the remarkable technological developments recently seen in dioxin countermeasures, flue-gas temperatures are increasingly being reduced from previous levels.
In conventional facilities where, formerly, only sulfuric acid dew-point corrosion occurred, there are now cases of hydrochloric acid dew-point corrosion that is caused by lower flue-gas temperatures resulting from remodeling with countermeasures against dioxins.
Developed to solve these problems is S-TEN steel for welded structures, highly resistant to sulfuric acid and hydrochloric acid dew-point corrosion.
S-TEN 1 has effective resistance to both sulfuric acid dew point corrosion and hydrochloric acid dew point corrosion, while S-TEN 2 is effectively resistant to sulfuric acid dew point corrosion.

Additional Information:

• Item Code: STEN
• Production Capacity: 1000

Product Details:

Corten B Steel Plates are corrosion resistant and need no maintenance. The plates are developed using weathering steel and a protecting layer is them on the steel surface when used in hazardous weather conditions. These steel plates are used in welded bridges, high buildings and shipping container, and other outside steel structures. Further, our valuable clients can avail these plates from us at the most affordable rates.

Features:

• Higher weather resistance than normal grades
• Minimum yield strength 50 KSI

Application:

• Architecture
• Sculpture
• Structural works
• Industrial chimneys
• Freight wagons
• Silos
• Containers
• Pylons

Additional Information:

• Production Capacity: Unlimited
• Delivery Time: 4 Weeks
• Packaging Details: Without Packing

Product Details:

The Corten Steel Plates are resistant to bad weather and its chemical composition makes it resistant to rust while using in industrial and urban environment.

Applications

• Resistance to weather
• Unique look
• Wide range of applications: domestic and industrial

Standard Sizes

• Thicknesses: 1.2 mm – 50 mm
• Widths: 1.25m, 1.5m, 2.5m
• Lengths: up to 12 m

Applications

These are specially used in:
• Bridge Construction
• Structures
• Fences
• Urban Furniture
• Sculptures
• Industrial Containers

Additional Information:

• Production Capacity: Unlimited
• Delivery Time: 4 Weeks
• Packaging Details: Loose

Product Details:

We have specialization in supplying a wide range of Corten Steel IRSM 41 Grade to meet varied industrial construction requirements. Today, in construction industry, there is an increased demand for our corrosion resistant plates that are thicker and complies with a specific standard. These products are procured from some of the most reliable vendors of the market. They use only finest quality of material such as steel and metal for manufacturing and fabricating these plates.

Features

• Corrosion resistant surface
• Customization is also possible
• Excellent durability
• Dimensionally accurate
• Longer life span as compared to other brands

Specifications :-

• Material :- Corten Steel
• Size :- Any

Additional Information:

• Production Capacity: 10000
• Delivery Time: 2 days
• Packaging Details: loose

Product Details:

S355J2W N / S355J2W+N EN 10025-5 DIN 1.8963 EN 10155 Plates from champak industries

Champak Stocks Cor-Ten-A / Cor-Ten-B / S355jowp / S355j2wp / S355jow / S355j2w / Irsm41-97 / Irs-M41 / Irsm-41 / Jis G3125 Spa-Hcorrosion Resistant / Weather Resistant Steel Sheets, Plate Cold Rolled & Hot Rolled, Astm A423, Astm A847welded Tubes, Erw Tubes, Seamless Tubes, Pipes, Round Pipes, Square Pipes, Rectangular Pipes

Corrosion Resistant and Weather Resistant Steel Canbe Also Supplied According to Followin Gst an Dard & Specifications

COR-TEN A, COR-TENA, COR-TEN A, CORTEN-A, CORTEN A

COR-TEN B, COR-TENB, COR-TEN B, CORTEN-B, CORTEN B

ASTM A588 Grade A, ASTM A 588 Grade-A, ASTMA-588 Grade A

ASTMA588 Grade B, ASTMA 588 Grade-B, ASTMA-588 Grade B

ASTMA588 Grade C, ASTMA 588 Grade-C, ASTMA-588 Grade C

ASTMA242 Type 1,ASTMA242 Type-1, ASTMA-242 Type 1

S355JOWP EN 10025-5, S355JOWPEN10025-5, S355 JOWP EN-10025-5

S355JOWP+N EN 10025-5, S355JOWP+N EN10025-5, S355 JOWP+N EN-10025-5

S355J2W EN 10025-5, S355J2W EN10025-5, S355 J2W EN-10025-5

S355J2W+N EN 10025-5, S355J2W+N EN10025-5, S355 J2W+N EN-10025-5

S355J2G1WEN 10155, S355J2G1W EN10155, S355 J2G1W EN-10155

S355K2G1W EN 10155, S355K2G1W EN10155, S355 K2G1W EN-10155

S355J2G2W EN 10155, S355J2G2W EN10155, S355 J2G2W EN-10155

S355K2G2W EN 10155, S355J2G2W EN10155, S355 K2G2W EN-10155

SAILCORIRSM41, IRSM-41, IRS-M41, IRS-M41, IRSM41-97 FORRAILWAYWAGON & CONTAINER

JIS G3125 SPA-H, JIS G3125-SPAH, JISG3125-SPA-H, JIS-G3125 Grade SPA-H, G3125-SPAH

ASTM A606 Type-2, ASTM A606 Type-4 High Strength with Improved Atmospheric Corrosion Resistance

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: MUMBAI

Product Details:

Corten Steel Grade A588 is widely used at construction sites to reinforce building structures. This steel plate exhibit superior corrosion resistance over regular carbon steel as a result of the development of a protective oxide film on the metals surface which slows down further corrosion.

The atmospheric corrosion resistance of A588 Grade A steel in most environments is substantially better than that of carbon structural steels with or without copper addition. When properly exposed to the atmosphere, A588 Grade A steel is suitable for many applications in the bare (unpainted) condition.

Specifications :-

• Material :- Steel
• Size :- Any

Additional Information:

• Production Capacity: 10000
• Delivery Time: 2 days
• Packaging Details: loose

Product Details:

Corten steel also known as Cor-Ten is kind of weather resistant steel which could more precisely be termed as atmospheric corrosion resistant steel. Our company supplies an assortment of steel plates, which are accessible in different specifications as per the requirement of our customers. Obtained from reliable vendors, our assortment of these plates is available at a reasonable price. When utilized uncovered, exhibits increased resistance to atmospheric corrosion in comparison to unalloyed steels.

Features:

• High durability
• Light weight
• Corrosion resistance
• Uniform construction
• Strength
• Toughness

Applications:

Corten A Steel Plates is mainly used for manufacturing container, rolling stock, oil rigs, harbor construction, oil platforms and other structural parts containing hydrogen sulfide corrosive media in petrochemical equipment.

Additional Information:

• Production Capacity: Unlimited
• Delivery Time: 4 Weeks
• Packaging Details: Loose

Product Details:

Corrosion Resistant Plate  A 588 is widely used at construction sites to reinforce building structures. This steel plate exhibit superior corrosion resistance over regular carbon steel as a result of the development of a protective oxide film on the surface of the metal which slows down further corrosion. 

Product Details:

Corrosion Resistant Plate  A 588 is widely used at construction sites to reinforce building structures. This steel plate exhibit superior corrosion resistance over regular carbon steel as a result of the development of a protective oxide film on the surface of the metal which slows down further corrosion.

Additional Information:

• Production Capacity: 10000
• Delivery Time: 2 days
• Packaging Details: loose

Product Details:

We develops and support quality and advancement and direct them in our items through consistent endeavors and quality control. We benefit our clients an exceptional quality item profile, helping them to pick an appropriate one for their industry.

Product Details:

It exhibits increased resistance to atmospheric corrosion compared to unalloyed steel as it forms and regenerates a protective layer under the influence of the weather.

Product Details:

S-TEN is a sulfuric acid and hydrochloric acid dew-point corrosion-resistant steel developed by Nippon Steel using proprietary technology.

• S-TEN exhibits the best resistance to sulfuric acid and hydrochloric acid dew-point corrosion found in the flue-gas treatment equipment used with coal-fired boilers, waste incineration plants, etc. (This steel has the finest application record in the field of thermal power generation and waste incineration plants, according to surveys conducted by Nippon Steel)
• S-TEN was awarded the Ichimura Industrial Award Achivement Award in 2007

S-TEN has strength, workability and weldability that are comparable to ordinary steel.S-TEN is more economical than stainless steel.S-TEN offers a rich product line ranging from hot-rolled sheets (plates), cold-rolled sheets and pipe and tubes to welding materials.

• Hot-rolled sheets (plates) conform to JIS G 3106 SM400A (S-TEN 1) and SM490A (S-TEN 2).

Recently, environmental issues are becoming pressing concerns. In parallel with this, construction of tall smokestacks, air preheaters, electrostatic precipitators and flue-gas desulfurizers and other treatment equipment has shown great strides.
Meanwhile, the mainstay industrial fuel has shifted from conventional coal to heavy oil, which poses a large problem of corrosion at the low-temperature section of flue-gas treatment equipment (in particular, air preheaters, flues and smokestacks) due to sulfur oxides.
The low-temperature section corrosion is the corrosion caused by high-temperature, highly-concentrated sulfuric acid, called sulfuric acid dew-point corrosion. This kind of corrosion differs from general atmospheric corrosion and causes heavy corrosion of not only ordinary steel but even stainless steel.
Further, because of the remarkable technological developments recently seen in dioxin countermeasures, flue-gas temperatures are increasingly being reduced from previous levels.
In conventional facilities where, formerly, only sulfuric acid dew-point corrosion occurred, there are now cases of hydrochloric acid dew-point corrosion that is caused by lower flue-gas temperatures resulting from remodeling with countermeasures against dioxins.
Developed to solve these problems is S-TEN steel for welded structures, highly resistant to sulfuric acid and hydrochloric acid dew-point corrosion.
S-TEN 1 has effective resistance to both sulfuric acid dew point corrosion and hydrochloric acid dew point corrosion, while S-TEN 2 is effectively resistant to sulfuric acid dew point corrosion.

Additional Information:

• Production Capacity: 20000
• Delivery Time: 7 DAYS
• Packaging Details: LOOSE