High Tensile Plates

Product Details:

Features

• IS 2062, E350 GRADE
• EN 10025, S355J2
• S355 J2+N
• S355J2N

 

WE have plate in stock With wide experience in industry, we are able to offer wide range of Boiler/PVQ Steel Plates, Alloy Steel Plates, High Tensile Steel Plates, Steel Plates for Oil & Gas lines, Mild Steel Plates, Ship Building Steel Plates Hot Rolled Coils and Special quality steel Plates. Our range is available in different grades like SA 515, SA 516, SA 516 HIC NACE Tested, SA 537 CL 1,S355 J2 G3, SAILMA, M.S. Plates, DIN 17100 ST 52.3, SA 387 and many other grades . We have capability to offer all these plates in compliance to any standards with stipulated time frames.

We procureof boiler quality plates, special quality plates and high tensile plates from well-known manufacturers such as Arcelormittal Steel, Azovstal Iron & Steel Works, Jindal Steel, Alchevsk Iron & Steel Works, Severstal, SAIL, Essar . Our constant interaction with fabricators across the country has helped us to access to surplus stocks that is delivered to our valued customers.

Product Details:

High Tensile Strength Steel Plates for Civil Engineering and Industrial Machinery Champak Industry- high tensile plate manufacturers, high tensile steel plates, tensile steel plates manufacturer, industrial steel plates supplier, high tensile brass plates, industrial machinery equipment suppliers, industrial machinery suppliers, industrial machinery wholesale, high strength steel plate. 590S/690S are economical to use and have good weldability with high toughness because they are produced by controlled rolling or TMCP and optimized chemical composition. They are, therefore, suitable for civil engineering and industrial machinery, even in cold regions.780S/980S quenched and tempered steel plates come in thicknesses of up to 50 mm with alloying elements reduced to minimum amounts to provide good weldability and high economy. They are thus suited for use in civil engineering and industrial machinery.780LE is manufactured using JFE's leading technologies including controlled rolling and micro-alloying in low levels, consequently, providing high weldability and high toughness in low temperature(-40oC) regions.

Product Details:

The High Tensile Steel Plate is the plates with high toughness and good welding ability. Made using graded steel, these plates are suitably used for various manufacturing procedures in cold regions. These plates possess good formability and are used in civil engineering and industrial machinery and in automobile industries for making lightweight automobiles.

Uses Of High Tensile Plate Heavy road vehicles: chassis, dumper bodies for high strength use a high tensile plate.

• Cranes construction: booms of mobile cranes made from the high tensile plate for higher strength
• Structural steelworks: bridges, bridge components, Components for offshore structures
• Pressure vessels: fixed and transportable storage tanks, vessels
• Power plants: penstocks, spiral cases
• Materials handling: lifting and mobile equipment 
• Mining and earthmoving equipment: roof supports. Agricultural equipment and trailers. Different Names S690QL, S700MC, Dillimax 690T, Maxil 690, Naxtra 70, Supralsim 690, weldox® 700E, QstE 690 TM HSLA Plates DIN EN S690 Q / S 690 QL / S690 QL1 Application All these High Tensile Plates are widely used for Crane, Crane Booms, Dump Truck, weldox®, Steel for structure Steel Plate Bridge.

Product Details:

WE develop and support quality and advancement and direct them in our items through consistent endeavors and quality control. We benefit our clients an exceptional quality item profile, helping them to pick an appropriate one for their industry.We are a maker, merchant, stockist, provider and exporter of Corten Steel Plates, both Corten A Steel Plates, that are eminent for their climate safe capacities and high quality, and, Corten A Steel Plates, which are light bodies and frame a defensive outside layer to keep erosion under control.

Product Details:

Champak Industries engaged in offering High Tensile Plate that are known for its toughness and good welding properties. Created with use of graded steel this plates are highly suitable for many manufacturing processes in cold regions. The plates possess great formability and are used in civil engineering and industrial machinery and in making light weight automobiles.

Features:

• High tensile strength
• Long service use
• All weather resistant

Product Details:

Champak Industries has large stocks of high tensile steel, sometimes known as High Strength steel, in a variety of grades. We focus on steel plates and specifically high tensile steel plates greater than 40 mm thick. For many customers a steel plate with a yield strength of 355 MPa or higher is considered to be high tensile steel and we have many tens of thousands of tones of these plates in stock. For the S355 and S460 MPa level we have plates to EN10025-2, EN10025-3, and EN10025-4. You can find more details on these under the structural steel section. For steels with a higher tensile strength to EN10025-6 we carry S690QL, S690QL1, S890QL, S960QL and the ultra-high tensile steel S1100QL. These steel plates are all from Dillinger Hutte, the world''s leading heavy plate mill and are certified to EN10204 3.2. We don''t stock any high tensile steel plates to ASTM standards though many of our plates will be suitable as an equivalent.

HIGH TENSILE STEEL PLATES EX-STOCK• Up to 300 mm thick
• Widths up to 3.5 metre wide
• Length up to 14 metres long
• EN10204 3.1 or 3.2 MTC
• Thick plates from German steel mill – Dillinger Hutte

High Tensile steel plates are available from stock in thicknesses up to 250 mm and our focus is to provide multiple plate options at every thickness to customers. We don''t just keep a couple of token thick plates and hope to buy additional plates when required from other stockholders. We specialise in carrying a large stock of all our plates so that we can deliver large quantities of high tensile plates immediately from our own stock. There are three key reasons to buy high tensile steel plates from Oakley Steel

1. We have the largest selection of thick plates available
2. The quality of the plates is excellent – we don''t stock poor quality China, India, Korea or Eastern Europe high tensile steel plates
3. We can deliver ex-mill quantities from stock

Product Details:

S690QL / NAXTRA 70 / WELTEN 780E / DOMEX700

The high tensile plates are the plates with high toughness and good welding ability. Made using graded steel, these plates are suitably used for various manufacturing procedures in cold regions. These plates possess good formability and are used in civil engineering and industrial machinery and in automobile industries for making lightweight automobiles.

Uses Of High Tensile Plate:

• Heavy road vehicles: chassis, dumper bodies for high strength use high tensile plate.
• Cranes construction: booms of mobile cranes made from high tensile plate for higher strength.
• Structural steelworks: bridges, bridge components,
• Components for offshore structures.
• Pressure vessels: fixed and transportable storage tanks, vessels.
• Power plants: penstocks, spiral cases.
• Materials handling: lifting and mobile equipment.
• Mining and earthmoving equipment: roof supports.
• Agricultural equipment and trailers.

Different Names:

S690QL, S700MC, Dillimax 690T, Maxil 690, Naxtra 70, Supralsim 690, Weldox 700E, QstE 690 TM HSLA Plates DIN EN S690 Q / S 690 QL / S690 QL1

Application:

All these High Tensile Plates are widely used for Crane, Crane Booms, Dump Truck, Weldox, Steel for structure & Steel Plate Bridge.

Chemical Composition (heat analysis, %) Specifications

In addition: Ti or/and V or/and Nb.
The manufacturer reserves the right to change the chemical composition.

Mechanical Properties.

Notch Impact Energy

Water quenched and tempered.

Typical Applications
Heavy road vehicles: chassis, dumper bodies. Cranes construction: booms of mobile cranes. Structural steelworks: bridges, bridge components, components for offshore structures. Pressure vessels: fixed and transportable storage tanks, vessels. Power plants: penstocks, spiral cases. Materials handling: lifting and mobile equipment. Mining and earthmoving equipment: roof supports. Agricultural equipment and trailers.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),Other
• Packaging Details: loose unpacked

Product Details:

Mild Steel A283 GR.C Plates Manufacturer Marc Steel is a known supplier and trader of ASTM A283 GR.C Plates, which are widely demanded by the clients for their fine sheen and sturdiness. With the help of our expert team members, we have been able to provide ASTM A283 GR.C Sheets. And thus, our ASTM A283 GR.C Coils are marked with perfection that is an exclusive blend of quality and competitive pricing. Our ASTM A283 Mild Steel Plates GR.C is available in different sizes and shapes that are suitable in different industries. Mild Steel ASTM A283 GR.C PlatesThe offered ASTM A283 Mild Steel Sheets GR.C found application in various fields and made using only high quality material. Typical applications of ASTM A283 Mild Steel Coils GR.C include heat exchangers, display racks, gas range burner rings, office furniture and other uses where corrosion resistance at minimum cost is important. Our ASTM A283 MS Plates GR.C is known for their dimensional accuracy and sturdy construction.